Dymo LabelPoint 350 Hardware Manual - Manual (Page 10)

12
Storing Formats
In addition to label text, you can store up to ten
specific label formats you use frequently. This
feature stores only the formatting information not
the label text.
To store the current format
1. Press
8
+ .
2. Select SAVE and then FORMAT.
The first of ten memory fields is displayed.
3. Use the arrow keys to move through the fields.
You can store a new format in any of the
memory locations, however, if you select a
location that is filled, the previously stored format
will be overwritten.
4. Select a field and press . The word NAME?
appears in the field.
5. Enter a name for the format and press . The
label format is saved and you are returned to the
label.
Recalling Stored Labels
and Formats
You can easily recall labels and formats stored in
memory to use at a later time.
To recall labels or formats
1. Press
8
+ .
2. Select Recall and then LABEL, FORMAT, or
LAST PRINTED.
The first memory location is displayed similar to
storing a label or format.
3. Select a label or format to recall and press .
Caring for Your Labelmaker
Your labelmaker is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your labelmaker from time to time to keep it
working properly. Clean the cutter blade each time
you replace the tape cassette.
To clean the cutter blade
1. Remove the label cassette.
2. Press and hold down the cutter lever to expose
the cutter blade.
3. Use a cotton ball and alcohol to clean both sides
of the blade.
4. Release the cutter lever.
You can also follow this procedure if the
cutter blade becomes lodged in the forward
position and will not move.
To clean the print head
♦ Clean the print head using the cleaning tool
located inside the tape compartment lid.
Settings
Memory
OK
OK
Settings
Memory
OK