Dymo LabelWriter 400/400 Duo/400 Turbo/400 Twin Turbo - Manual (Page 40)

Using the Tape Editor
36
A warning dialog box appears informing you that the text will be reformatted.
NOTE If the contents of the label are too long to fit vertically on a fixed width label, the excess
content is truncated. This action cannot be undone once you click Yes.
2 Click Yes.
The text of your label is now displayed in a single vertical column.
Printing from Other Applications
The DYMO Label Software installation wizard installs a standard Windows printer driver on your
computer so the DYMO LabelWriter Duo Tape printer will appear in your list of printers. This
printer can be used to print directly from other applications, such as Microsoft Word or Access, in
the same manner as you would use any other printer.
To successfully print to a DYMO tape printer, you need to set the correct page size, orientation, and
margins for the tape cassette currently in the printer. Table 1 gives the paper size and margin
settings for each of the label sizes supported by the DYMO tape printers.
Table 1. DYMO Tape Printer Page Size and Margin Settings
Paper Name
Paper
Height
Paper
Width
Top
Margin
Bottom
Margin
Left
Margin
Right
Margin
Address Label 1”
(24 mm) 3.5”
(89 mm) 0.23”
(5.8 mm) 0.24”
(6.1 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)
Large Pendaflex 0.5”
(12 mm) 3.5”
(89 mm) 0.09”
(2.3 mm) 0.10”
(2.6 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)
Small Pendaflex 0.5”
(12 mm) 3.5”
(89 mm) 0.09”
(2.3 mm) 0.10”
(2.6 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)
1/3 File 0.5”
(12 mm) 3.5”
(89 mm) 0.09”
(2.3 mm) 0.10”
(2.6 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)
1/5 File 0.5”
(12 mm) 2”
(51 mm) 0.09”
(2.3 mm) 0.10”
(2.6 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)
6 mm Label 0.25”
(6 mm) 3.5”
(89 mm) 0.04”
(1 mm) 0.04”
(1 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)
9 mm Label 0.375”
(9 mm) 3.5”
(89 mm) 0.03”
(1 mm) 0.04”
(1 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)
12 mm Label 0.5”
(12 mm) 3.5”
(89 mm) 0.09”
(2.3 mm) 0.10”
(2.6 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)
19 mm Label 0.75”
(19 mm) 3.5”
(89 mm) 0.11”
(2.8 mm) 0.11”
(2.8 mm) 0.4”
(10.2 mm) 0.39”
(9.9 mm)