Dymo LabelManager 350D - Manual (Page 12)

12
Previewing Your Label
You can preview the text or format of your label prior to
printing. A multiple-line label is previewed as a single-line.
To preview your label
Press 1. .
Use the down arrow key to select 2. Print Preview and
press H .
Use the arrow keys to select 3. Text or Format.
If you select Text, the text of the label scrolls across the
display. If you select Format, the format selected displays
briefly.
Aligning the Text
When you print a fixed length label you can choose to align the
text at the left, center, or right side of the label. For multi-line
labels, all lines of text are aligned left, center, or right relative
to each other.
To align the text
Press 1. F + .
Use the arrow keys to select the desired alignment and 2.
press H .
Press 3. 6 to turn off the alignment setting.
Changing the Cutting Option
You can choose to have each label automatically cut after
printing or you can manually cut the labels using the Cutter
key. By default, labels are cut automatically. When manual
cutting is selected and you print multiple copies or serialized
labels, a dotted cut-line is printed between each label.
To change the cutting option
Press 1.
Settings
.
Use the arrow keys to select 2. Set Auto Cut and press H .
Use the arrow keys to select 3. Auto Cut On or Off, and then
press H .
This setting will remain until you change it.
Adjusting the Print Contrast
You can adjust the print contrast to fine tune the print quality
of your label.
To set the contrast
Press 1.
Settings
.
Use the arrow keys to select 2. Set Contrast and press H .
Use the arrow keys to select one of the five contrast settings 3.
and press H .
Using Label Maker Memory
The label maker has a powerful memory feature that stores
text and formatting as follows:
Automatically stores the last nine labels printed.
•
Allows you to store the text of up to nine labels you use
•
frequently.
Allows you to name and store up to nine commonly used
•
label formats.
Storing Label Text
The label maker automatically keeps the last nine labels
printed in a text buffer. In addition, you can store up to nine
specific labels you use frequently.
To store the current label text
Press 1.
Memory
.
Use the arrow keys to select 2. SAVE and then LABEL.
Nine fields, which represent memory locations, are
displayed. Fields that are filled indicate stored label text.
You can store new text in any of the memory locations,
however, if you select a location that is filled, the previous
label text will be overwritten.
Use the arrow keys to select a memory location and 3.
press H .
Your label text is saved and you are returned to the label.
LM350D manual UK_WEU.indd 12 09-08-2007 13:44:38