Using symbols and special characters, Using tabs, Adding symbols – Dymo LabelManager 350D User Manual
Page 10

10
Figure 9
Using Tabs
You can add tabs to a label to align text on multi-line labels. Tabs
are left justified and the default spacing is 50 mm (2.0”).
To change the tab spacing
Press
1.
Settings
.
Use the arrow keys to select
2.
Set Tab Length and press
H
.
Use the up and down arrow keys to increase or decrease the
3.
tab setting, and then press
H
.
To insert a tab
Enter your text.
1.
Press the
2.
æ
key and continue entering text.
Using Symbols and Special
Characters
Symbols and other special characters can be added to your
labels.
Adding Symbols
The label maker supports the extended symbol set as shown
in Figure 9.
To add a symbol
Press
1.
.
The first row of symbols shown in the table appears in the
display.
Use the arrow keys to move to the desired symbol.
2.
The left and right arrows scroll horizontally along the row
of symbols. The up and down arrow keys scroll vertically
through the rows of symbols. To quickly see a row of symbols,
you can press the letter corresponding to the row you want.
When you locate the desired symbol, press
3.
H
to add the
symbol to your label text.
LM350D manual UK_WEU.indd 10
09-08-2007 13:44:36