ClearOne MUR2EM Installation Guide - Manual (Page 15)

Connecting Multiple MUR2EMs
NS-1005-7140 3-3
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
To configure the IP addresses of your MUR2EMs, complete the following steps:
1. Select Start>All Programs>Accessories>Communications>HyperTerminal.
The HyperTerminal screen displays (see Figure 3-2).
Figure 3-2 HyperTerminal screen
2. In the Connection Description dialog box, enter MUR2EM in the Name field.
3. Select OK.
The Connect To dialog box displays (see Figure 3-3).
Figure 3-3 Connect To dialog box