ClearOne GT1524 - Manual (Page 15)

11 Installation ~ LCD Programming
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Inputs
There are four main submenus under the Inputs menu tree: Mic/Line In, Aux In, 4
Wire In, and From Telco (see Figure 2.7).
Mic/Line In
Gain Adjust. This adjusts the Mic/Line In submenus, including the level for the
Input gain (ranging between -20dB and 20dB). The default setting is 0dB.
Mic/Line Input. This input defaults as a line-level input (0dB gain) but can be
switched to a mic level input (55dB or 25dB gain).
Mute. This parameter mutes the input channel.
Phantom Power. Defaults with 24V phantom power disabled, but may be switched
on to accommodate input devices requiring phantom power.
AGC. The input can use automatic gain control (AGC). This feature keeps softer and
louder talkers at a consistent transmit level. This feature is disabled when shipped
from the factory. The target gain is 0dB and adjusts at 2dB per second. The AGC
start adjustment is -20dB, but will adjust only +6dB. Adjustments will not be made
at .5dB on either side of the target (0dB).
High-Pass Filter. A high-pass filter may be selected on the Mic/Line input to
reduce unwanted noise. The filter has a break frequency at 250Hz, and -3dB down
at 200Hz, then rolls off at 6dB per octave. This feature is disabled when shipped
from the factory.
Echo Canceller. Activate or deactivate the echo cancellation feature for this input.
Factory default is On.
NLP Adjust. Non-linear processing (NLP) has four settings: soft (6dB), medium
(12dB), aggressive (18dB), and Off. NLP adds more echo cancelling “horsepower”
in difficult acoustical environments. Use care when increasing NLP, because of the
corresponding trade-offs which can include suppression and half-duplex operation.
Factory default is Soft.
Aux In, 4-Wire In, and From Telco
Gain Adjust. This adjusts each Input gain (ranging between -20dB and 20dB) in
conjunction with the LCD readout and the LED bar graph. The default setting is
0dBu.
Mute. This parameter mutes the input channel.