ClearOne Spontania User Setup Guide - Manual (Page 15)

If the recording cannot be heard clearly, the user should click “ No ” and select another device, if
possible. If no other devices are available, the user will be informed that the sound does not work
properly. In this case, no sound will be heard during the Spontania session until the situation is
corrected.
2. Microphone
Once the audio test is complete, the user will be asked to test the microphone. The user must
select the desired microphone from the list of sound recording options recognized by the current
device.
Depending on the device selected from the list ‐ it may be possible to obtain some information on
the status of the microphone visually before clicking “
Check Recording .” The green oscillating bar
located to the right of the selected device will show whether or not the device is registering any
sound. If the user is speaking and the bar does not oscillate, it is recommended to try again with
another microphone, if available.
By clicking on “
Check Recording ”, the user will be asked to speak into the microphone to generate
a short recording. The recording will take place while the broad green bar at the bottom is
progressing to the right, and the message “
Recording ” will be displayed. Upon completion, the
user will be able to listen to the recording, indicated by the on‐screen “ Playing ” message.
If the user is not satisfied with the test results, the microphone test can be repeated until the
appropriate microphone has been selected and adjusted properly.
If the PC has no microphone available, or the recording test has not been completed successfully,
the other participants will not be able to hear the user during the Spontania session.
Spontania: User Setup Guide 15