LaMotte Mobile WaterLink Spin Photometer - Manual (Page 10)

10
3. Locate a customer in the program
4.
If required select a pool or spa to test
5. Press the “Spin” button
NOTE: if using a water analysis program other than WaterLink DataMate
Web, the URL for the program on the Settings tab of the WaterLink Spin
app may need to change.
 BLUETOOTH CONNECTION
Barriers to wireless signals can reduce the range of wireless devices. The
Mobile WaterLink Spin will work best if there are no walls between it and the
receiving device.
1. Open WaterLink Spin app.
2. Go to the “settings” tab.
3. Tap “select meter” button to open the select meter popup.
4. Tap your meter if it is listed. If not, tap “scan for devices”. Select your meter
from the list of detected devices
5. If prompted to enter a code, enter ‘1234’
TESTING
1. Remove a chlorine/bromine or biguanide disk from the package.
2. Use the syringe (1189) to fi ll the disk with the pool or spa water. Add water
until the water column reaches the fi ll line on the disk.
3. Insert the disk into the meter.
4. Cover the disk with the black disk cover (1718).
5. Close the lid.
6. Press SPIN TEST button in the app.
MAINTENANCE
 CLEANING
The optical system of the Waterlink Spin must be kept clean and dry for
optimal performance. Dry the disk with a lint-free wipe before placing it into the
chamber to avoid introducing moisture. For best results store the instrument in
an area that is dry and free from aggressive chemical vapors.
Clean the exterior housing with a damp, lint-free cloth. Do not allow water
to enter the light chamber or any other parts of the meter. To clean the light
chamber and optic lenses, point a can of compressed air into the light
chamber and the lid and blow the pressurized air into the light chamber and