LaMotte ATQ Digital Series Water Softener Demo Kit - Manual (Page 4)

4
Safety Information
Read the instruction manual thoroughly to familiarize yourself with the test procedures before you begin.
Make note of any precautions in the instructions.
Read the labels on all LaMotte reagent containers prior to use. Some containers include precautionary notices
and fi rst aid information. Certain reagents are considered hazardous substances and are designated with a * in
the instruction manual. Material Safety Data Sheets (MSDS) are available at www.lamote.com. Read the MSDS
before using these reagents. Additional emergency information for all LaMotte reagents is available 24 hours
a day from the Poison Control Center listed in the front of the phone book. Be prepared to supply the name and
four-digit LaMotte code number found on the container label or at the top of the MSDS. LaMotte reagents are
registered with a computerized poison control information system available to all local poison control centers.
Keep equipment and reagent chemicals out of the reach of young children.
Protect Yourself and Equipment: Use Proper Analytical Techniques
Testing Hints
Protect reagents
and components
from extreme
heat and cold.
Tightly close all
reagent containers
immediately after
use. Be sure not to
interchange caps
and pipets from
different containers. Avoid
prolonged
exposure of
equipment
and reagents
to direct
sunlight.
Wipe up any reagent chemical
spills, liquid or powder, as
soon as they occur. Refer to
label and accompanying
MSDS for proper
reagent disposal. Use care when dispensing or
handling all reagents due to
safety reasons. Some
chemicals also may cause
permanent stains if spilled.
1. 2. 3.
4. 5.