LaMotte SMARTLink3 - Manual (Page 5)

Connecting The Meter To A Computer
Plug the smaller end of the USB cable (USB mini B connector) into the 1.
meter.
Plug the larger end of the USB cable (USB Type A connector) into a
2.
USB port on the computer.
Place the meter in “Run PC Link” mode.
3.
Site Information Setup
Click on the “Site List” button on the left hand side of the SMARTLink 3 1.
window.
To add a new site, type a site number and name into the empty row at
2.
the bottom of the table, or click the “Add new” button in the toolbar.
After making changes to the table, click the “Save Data” button in the
3.
toolbar to save the changes.
To delete a site record, highlight it by clicking on the row to be deleted.
4.
Click the “delete” button in the toolbar to delete the highlighted row.
To close the Site List, click the “X” in the upper right hand corner of the
5.
Site List screen to close the window.
5