Culligan Gold SeriesTM - Manual (Page 4)

Culligan
®
Gold Series Water Conditioners with Time Clock, Aqua-Sensor
®
Device or
Soft-Minder
®
Meter
9” Model 12” Model
Control Valve 5-cycle Reinforced 5-cycle Reinforced
Thermoplastic Thermoplastic
Overall Conditioner Height 51 in. (1,295 mm) 51 in. (1,295 mm)
Media Tank Dimensions (Dia. x Ht.) 9 x 45 in. 12 x 45 in.
229 x 1,143 mm 305 x 1,143 mm
Salt Storage Tank Dimensions 16 x 43 in. 18 x 43 in.
(Dia. x Ht.) 406 x 1,092 mm 457 x 1,092 mm
18 x 43 in.
457 x 1,092 mm
Exchange Media, Type & Quantity Cullex
®
Media, 1.0 ft 3 Cullex Media, 1.5 ft 3
Cullex Media, 28.32 L Cullex Media, 42.48 L
Underbedding, Type & Quantity No Underbedding Cullsan Underbedding, 30 lb.
No Underbedding Cullsan Underbedding, 14 kg
Exchange Capacity @ Salt 18,200 gr @ 4 lb. 26,900 gr @ 6 lb.
Dosage Per Recharge 1,179 g @ 1.8 kg 1,743 g @ 2.7 kg
27,300 gr @ 8 lb. 39,600 gr @ 12 lb.
1,769 g @3.6 kg 2,566 g @ 5.4 kg
30,900 gr @ 12 lb. 45,400 gr @ 18 lb.
2,002 g @ 5.4 kg 2,942 g @ 8.1 kg
Efficiency rated dosage 1 4,550 gr/lb (650 g/kg) 4,490 gr/lb (641 g/kg)
Freeboard to Media 2 13.5 - 15.5 in. 13.0 - 15.0 in.
343 - 394 mm 330 - 381 mm
Freeboard to Underbedding 3 No Underbedding 38.5 in. (978 mm)
Salt Storage Capacity 250 lb. or 350 lb. 375 lb.
114 kg or 170 kg 170 kg
Rated Service Flow @ Pressure Drop 9 gpm @ 15 psi 10.5 gpm @ 15 psi
34 Lpm @ 102 kPa 39.7 Lpm @ 102 kPa
Total Hardness, Maximum 75 gpg (1,283 mg/L) 99 gpg (1,692 mg/L)
Total Iron, Maximum (dissolved) 5 ppm (5 mg/L) 5 ppm (5 mg/L)
Hardness to Iron Ratio, Minimum 8 gpg to 1 ppm 8 gpg to 1 ppm
140 mg/L to 1 mg/L 140 mg/L to 1 mg/L
Operating Pressure 20 - 125 psi (140 - 860 kPa) 20 - 125 psi (140 - 860 kPa)
Operating Temperature 33 - 120°F (1 - 50°C) 33 - 120°F (1 - 50°C)
Electrical Requirements 24V/60 Hz 24V/60 Hz
Electrical Power Consumption, Min./Max. 3 Watts/35 Watts 3 Watts/35 Watts
Drain Flow, Maximum 4 2.0 gpm (8 Lpm) 3.5 gpm (14 Lpm)
Recharge Time, Average 5 68 min. 57 min.
Recharge Water Consumption 43 gal. (162L) 83 gal. (314 L)
1 The efficiency rated dosage is only valid at the 4 lb. salt dosage for the 9” model and 6 lb. salt dosage for the 12” model.
2 Measured from top of media to top surface of tank threads (backwashed and drained).
3 Measured from top of underbedding to top of inlet fitting.
4 Backwash at 120 psi (830 kPa).
5 10 minute backwash, 4 lb. (1.8 kg) 9” model or 6 lb. (2.7 kg) 12” model salt dosage at 30 psi (204 kPa).
2
Specifications