Culligan Gold SeriesTM - Manual (Page 14)

12
1
2
3
4
Following these simple precautions will help assure continued trouble-free service and keep
your Culligan Water Conditioner looking like new for years.
Do not place heavy objects on top of the salt storage tank or timer cover.
Use only mild soap and warm water when cleaning the exterior of the conditioner.
Never use harsh, abrasive cleaning compounds or those which contain acid, such as
vinegar, bleach and similar products.
Important: Protect your water conditioner and the entire drainline from freezing
temperatures. DANGER: If your unit should freeze, do not attempt to
disassemble it. Call your Culligan Dealer.
Important: Culligan water softeners are sold for use on potable water, only. If at any
time the water becomes contaminated, such as during a “boil water” situation, the
operation of the water softener should be discontinued until it is verified that the
water is again potable. To do this, push the red knob on the back of the water
softener against the barrel of the bypass valve. Then, call your Culligan dealer to
have your system sanitized before it is placed back into service.
Should service, adjustment or trouble-shooting information be needed which is not
covered in the Use and Care Guide, call your Culligan Dealer.
Note: Following the manufacturer’s instructions regarding operation, maintenance and replace-
ment requirements, including replacement of filters if applicable, is essential for Culligan’s
products to perform as advertised.
If you have further questions, please call your local independently operated Culligan dealer. He
or she will be glad to be of assistance to you.
Care and Cleaning of Your Water Conditioner
5