Vixen Sphinx SXP - Manual (Page 48)

Chapter 4 AUTOMATIC GOTO SLEWING
Entering the Orbital Elements of the Comet
OK: Choose OK to slew the telescope to the comet you chose.
Press the key to start the Go-To slewing. To stop, shift the cursor to Cancel with the
or • direction key and press the (or ) key. The entry dialog box disappears and
you are ready to choose another.
Change Data: Choose “Change Data” to rewrite the orbital elements.
To change the parameters of the set orbital elements, display the entry dialog box and choose “Change Data” with the or direction
key. Then, press the key to change the parameters.
Delete: Choose “Delete” to clear the orbital elements.
To delete the entered orbital elements of a comet, display the entry dialog box and choose “Delete” with the or direction key. Then,
press the key.
Note: If your STAR BOOK TEN is connected to a PC with LAN, the orbital elements can be input, changed or deleted through the PC.
48