Vixen STARBOOK-S - Manual (Page 57)

57
3 -0.3/+0.3 of the sidereal rate
:
:
:
20 -2/+2 of the sidereal rate
The best suited correction rate may vary according to equipments used. Use the rate that makes
your autoguiding smooth.
When you finish the settings, choose OK and press Select to enter.
Page 53
How to Update your STARBOOK-S
CAUTION!
- Please use new batteries, an AC Adapter or a constant voltage power supply for the
STARBOOK-S for the update. For data transfer make sure that you have a stable power supply
for your PC. You may fail to reboot the STARBOOK-S if the power supply is turned off during
the update. In that case, ask your local Vixen dealer for repair (It is chargeable on you). All
your data stored in the STARBOOK-S may be initialized after repair.
- You may have to alter the network settings in your PC for the update. Please record the
original settings in the PC before changing them for the update.
- The data of your observing location stored in the STARBOOK-S may be initialized as a result of
the update. You should write down your current settings before you start to update.
EXEMPTION
- Vixen Co., Ltd and Vixen’s international distributors assume no liability whatsoever for any
damage caused by using or installing this update. Installation and use are at the customer’s risk,
unless Vixen Co., Ltd. and Vixen’s international distributors recognize a defect in the software.
Requirements
Operating System
Microsoft Windows® 98Second Edition
Microsoft Windows® Me
Windows® XP Home Edition / Windows® XP Professional
Web Browser Internet Explorer 5.0 or over
CPU Pentium® II 400MHz or better
RAM 128MB or more, but 256MB or more for Windows® XP
LAN 10BASE-T/100BASE-T
Procedures for one to one connection
These procedures are for a one to one connection between the STARBOOK-S and a PC. When
you connect the STARBOOK-S to LAN or a router, refer to page 56.
MrStarGuy,
Inc.