Technical service manual, Warranty – Viking Pump TSM350 HG-08/HG-10 Helical Gear Pumps User Manual

Page 10

TECHNICAL SERVICE

MANUAL

VIKING PUMP, INC. • A Unit of IDEX Corporation • www.vikingpump.com

SECTION TSM 350
PAGE

10 OF 10

ISSUE

WARRANTY

Viking warrants all products manufactured by it to be

free from defects in workmanship or material for a period

of one (1) year from date of startup, provided that in no

event shall this warranty extend more than eighteen (18)

months from the date of shipment from Viking. If, during

said warranty period, any products sold by Viking prove to

be defective in workmanship or material under normal use

and service, and if such products are returned to Viking’s

factory at Cedar Falls, Iowa, transportation charges

prepaid, and if the products are found by Viking to be

defective in workmanship or material, they will be replaced

or repaired free of charge, FOB. Cedar Falls, Iowa.

Viking assumes no liability for consequential damages

of any kind and the purchaser by acceptance of delivery

assumes all liability for the consequences of the use or

misuse of Viking products by the purchaser, his employees

or others. Viking will assume no field expense for service

or parts unless authorized by it in advance.

Equipment and accessories purchased by Viking from

outside sources which are incorporated into any Viking

product are warranted only to the extent of and by the

original manufacturer’s warranty or guarantee, if any.

THIS IS VIKING’S SOLE WARRANTY AND IS IN

LIEU OF ALL OTHER WARRANTIES, EXPRESSED

OR IMPLIED, WHICH ARE HEREBY EXCLUDED,

INCLUDING IN PARTICULAR ALL WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. No officer or employee of IDEX Corporation or

Viking Pump, Inc.. is authorized to alter this warranty.

INSTALLATION, START UP, TROUBLESHOOTING,

PREVENTIVE MAINTENANCE, DO’S & DON’TS

SERIES HG-08 & HG-10 HELICAL GEAR PUMPS