Tweco Victor Thermal Dynamics Interface Cable - Manual

Manual 0-5327 1
Please read and understand all instructions before using these cable connectors.
WARNINGS
Disconnect primary power at the source before performing any inspection or repairs.
Only a qualified technician should perform this procedure.
Follow the electrostatic discharge instructions included with the component to prevent damage to the
component.
This replacement part has been supplied with interface cable(s) for 2 pin and or 5 pin cables for the sole purpose of
interchangeability of components using the Molex Mini Fit Senior connections. Most systems will not require these
interface cables but in the event dissimilar connection materials need to be mated together these interface cables will
be required. These interface cables are used in multiple systems that may have more cables than the system being
worked on. It is possible that the system being repaired may not have or need all the cables provided in this kit.
CAUTION
It is critical that dissimilar materials are not mated together in this power application. Mixing the ma-
terials may cause a galvanic reaction creating corrosion which will cause the equipment to not function
properly or damage power connections.
Shown below 5 pin Jumper Shown below 2 pin Jumper
Gold Socket End Tin Pin End Gold Socket End Tin Pin End
Original Publication Date: 2013 Manual no.: 0-5327
Revision Date: 3/18/2014 Revision: AB
Interface Cable
Installation Instructions