Canon IMAGECLASS MF3200 - Manual (Page 130)

11-6
T
roubleshooting
14
Insert the toner cartridge into
the machine as far as it will go.
Hold the toner cartridge and align the
protrusions (A) on both sides of the toner
cartridge to the guides (B) in the machine,
then gently slide the toner cartridge into the
machine as far as it will go.
Be sure to position the arrow mark (C) on
the toner cartridge towards the inside of
the machine.
15
Close the front cover.
CAUTION
Be careful not to get your fingers caught.
NOTE
After you replace the toner cartridge and
close the front cover, the machine should
be ready for operating. If the machine
returns to the ready state for operating,
troubleshooting has been successful. If the
machine does not return to the ready state
for operating, confirm that the paper
release levers are pushed back to their
original position, and check to see that
jammed paper is not left in the machine.
A
B
B
C