Powersafe, Quickboot, Po w er ing – Sound Devices 633 User Manual
Page 60
Good
OK
Warning
Critical. No other backup power sources avail-
able. Automatic shutdown will occur soon.
PowerSafe
When all connected power sources are depleted or power is lost unexpectedly, the PowerSafe circuit-
ry will activate: The 633 will display a warning, stop any active recordings, finish writing files, and
shut the 633 down. The PowerSafe Battery will power the 633 during this time. This feature ensures
that files will be protected even in the event of unexpected power loss.
The PowerSafe Battery recharges with the active power source only when the 633 is powered on.
QuickBoot
QuickBoot circuitry is enabled for 2 hours after the 633 is powered down. During this time, the 633
can turn on and start recording in less than 2 seconds. Each time the 633 is turned on and off, this 2
hour timer is reset. After 2 hours of being powered down, QuickBoot is deactivated and powering
up will result in a normal, slightly longer boot process.
The TC LED on the front panel will blink every 2 seconds to indicate QuickBoot is engaged.
To
manually deactivate QuickBoot, hold the Menu Button down for 5 seconds while the 633 is powered
down. The LCD screen will flash quickly and the TC LED will stop blinking, indicating that Quick-
Boot is not activated.
633 User Guide and Technical Information
54
v. 1.02
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Po
w
er
ing