Sound Devices 633 - Manual (Page 12)

3) Connect Audio Source
Using a standard XLR cable, connect a microphone or line level analog source to Input 1 on the left
panel.
4) Power On Input
If the Input 1 trim knob is recessed, pop it up by pushing it in. If the trim knob is rotated fully counter-
clockwise, the input is powered off. To power the input on, rotate the trim knob clockwise until it
clicks.
633 User Guide and Technical Information
6
v. 1.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Quic
k S
tar
t Guide