SONIQ E46Z10A - Manual (Page 13)

External Connection
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH.
1. Connect an Optical Cable between the SPDIF jacks on the TV and the Digital Audio Input
jacks on the Digital Audio System. When a Digital Audio System is connected to the
SPDIF terminal: Decrease the gain (volume) of the TV, and adjust the volume level with
the volume control. Digital Audio System's
Connecting a Amplifier/DVD Home Theater
TV Rear Panel
Coaxial Cable (Not supplied)
Digital Audio System
HDMI 2 HDMI 1 AV
OUT OUT IN
SPDIF ANT AUDIO VGA
IN
Connecting a PC
Each PC has a different back panel configuration.
The HDMI jacks do not support PC connection.
1. Connect a D-Sub Cable between VGA/PC IN connector on the TV and the PC output
connector on your computer.
2. Connect a PC Audio Cable between PC AUDIO IN jack on the TV and the Audio Out jack
of the soundcard on your computer.
You should set PC software before you connect a PC to your TV (please refer to "PC
Note:
1. Whenever you connect an external device to your TV, make sure that power on the unit is
turned off.
2. When connecting an external device, match the color of the connection terminal to the
cable.
Display'' settings)
External Connection
D-Sub Cable (Not supplied)
PC Audio Cable (Not supplied)
PC
2
1
HDMI 2 HDMI 1 AV
OUT OUT IN
SPDIF ANT AUDIO VGA
IN
-23- -24-
60Hz
60Hz
60Hz
60Hz
640x480
800X600
1024X768
1280X1024
Resolution Input
VGA 60Hz
640x480
PC/VGA
SVGA
XGA
SXGA
75Hz
60Hz
75Hz
60Hz
75Hz
60Hz
800X600
1024X768
1280X1024
Vertical
Frequency
60Hz 1360X768
Supporting signals
Input Mode
DTV
ATV
DVB-T
CVBS PAL/NTSC/SECAM
PAL BG DK I
SECAM DK BG
Resolution Input
Component
60Hz
60Hz
50Hz/60Hz
480i
480p
720p
50Hz/60Hz 1080i
HDMI
DVI-HDMI
50Hz/60Hz
50Hz/60Hz
480p
720p 60Hz
1080i
Vertical
Frequency
50Hz/60Hz 1080p
50Hz/60Hz 1080p
50Hz
50Hz 576i
576p
Notice of PC display card compatible:
Some kinds of PC display card may not compatible with our television;
We will recommend using the onboard display card of PC if the TV showing “INVALID FORMAT”
in PC mode. Please do not use independent display card.
TV Rear Panel
HDMI 2 HDMI 1 AV
OUT OUT IN
SPDIF ANT AUDIO VGA
IN
White Red
AV cable
Red Wh
tei
Y
low e l
Home theatre system
with digital input
White Red
Each external input source device has a different
back panel configuration. When connecting an
external device, match the color of the connection
terminal to the cable.
1. Connect Audio Cables between the AUDIO L
and R OUT on the TV and AUDIO IN [R-
AUDIO-L]on the Amplifier/DVD Home Theater.
When an audio amplifier is connected to the AV
OUT [R-AUDIO-L] terminals: Decrease the gain
(volume) of the TV, and adjust the volume level
with the Amplifier's volume control.
Note: 1. Whenever you connect an external device to your TV, make sure that power on the
unit is turned off.
2. When connecting an external device, match the color of the connection terminal
to the cable.
Audio Cable
(Not supplied)