SONIQ E22Z10A - Manual (Page 19)

- 19 -
TIME MENU
1. Press the TV MENU button.
2. Use the or button to select the .
3. Use the or button to select the options (Clock,
Sleep Timer, Time Zone), adjust them using the or
button.
4. Press the TV MENU button to return to previous menu.
5. To exit the setup menu and return to the normal screen,
press the EXIT button.
• Clock : The clock is set automatically when receiving a
digital signal.
• Sleep Timer : Select the time to turn the unit to Standby
mode automatically: Off -> 5min - - -> 90min -> 120min.
• Time Zone : Select your time zone.
SETUP MENU
1. Press the TV MENU button.
2. Use the or button to select the .
3. Use the or button to select the options (OSD
Language, Audio Language, Subtitle Language,
Restore Setting, PC Setup), adjust them using the
or button.
4. Press the TV MENU button to return to previous menu.
5. To exit the setup menu and return to the normal screen,
press the EXIT button.
• OSD Language : Select your preferred On Screen Display
language.
• Audio Language : Select your preferred audio language.
(Available for digital channels if multiple audio languages
are broadcasted.)
• Subtitle Language : Select your preferred subtitle language or turn off subtitle. (Available for digital
channels if multiple subtitle languages are broadcasted.)
• Restore Setting : To restore the system settings to the factory default.
TV / DTV SETUP
• PC Setup : Use the or button to select the options (Auto Adjust, Horizontal Pos., Vertical Pos.,
Size, Phase) and adjust them by using the or buttons.
It supports the resolution of display :
• Auto Adjust : Adjust the image automatically.
• Horizontal Pos. : Centre the image by moving it left or right.
• Vertical Pos. : Centre the image by moving it up or down.
• Size : Adjust the screen size.
• Phase : Adjust when characters have low contrast or when the image flickers.
800 x 600 x 60Hz
1024 x 768 x 60Hz
1280 x 1024 x 60Hz 1280 x 800 x 60Hz
1366 x 768 x 60Hz
1680 x 1050 x 60Hz