Soleus GPS Vibe (SG102) - Manual - Manual (Page 8)

Soleus Running – GPS Vibe
5.1.4. How to view your current data before saving while the chronograph is stopped.
Following are the information as you press S5:
Notes:
o Before going for a run exercise, it is highly recommended that you set your user
profile first so that the calories will be calculated properly. Go to SET mode/USER.
o When the Chronograph is stopped and reset in RUN mode, if no activity for 10
minutes, the GPS will be on Standby mode ( GPS ring icon flashing) and return to
TIME mode.
o While in RUN mode, then the GPS signal suddenly becomes weak lost for any
reason, the Watch will display LOST GPS signal until it receives GPS signal again.
o Maximum of 15 hours of track record / 30 data files/ 100 laps for each data file can
be saved in memory.
o Speed range: 0 to 9999.9 KM/H (MI/H)
o Distance range: 0 to 9,999.99 KM (6209.99 MI)
o Chrono range: 0 to 99:59:59
o Calorie range: 0 to 999,999
5.2) Using Chronograph mode:
RUN mode & CHRONO mode has the same chronograph counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in CHRONO mode.
5.2.1. How to enter CHRONO mode:
5.2.2. How to START, take LAP, STOP, and SAVE: