Ultima gem® 2 pedestal – Revel Gem 2 User Manual
Page 29
![background image](/manuals/593346/29/background.png)
Ultima Gem2
Owner’s Manual
A-3
ULTIMA GEM® 2 PEDESTAL
Thank you for purchasing the Ultima Gem
®
2 Pedestal for your Revel
®
Ultima Gem
®
2 Loudspeaker. Follow the instructions below to unpack
the pedestal.
UNPACKING
Step 1: Place the packing carton down so that the long side of the
carton that’s marked “Open this Side” is facing up.
Step 2: Open both the outer box and inner box so that one side of
the packaged pedestal is exposed.
Step 3: Without allowing the flaps to close, invert the carton so that
the open flaps of both boxes are on the bottom.
Step 4: Lift the cartons up and off the stand.
Step 5: Remove the Top End Pad from the top of the pedestal and
the Base End Pad from the bottom of the pedestal.
Step 6: Remove the Cardboard Sleeve and the Middle Pads.
Step 7: Remove the cloth bag. Handle carefully to ensure that the
pedestal isn’t scuffed or bumped.
You are now ready to start the installation procedure. Turn this sheet
over to proceed.
NOTE: Save all original packaging materials.
Accessory Bag
Top End Pad
Cloth Bag
Base End Pad
Cardboard Sleeve
Middle Pads
Pedestal