Revel Gem 2 User Manual
Page 16
Ultima Gem2
Owner’s Manual
16
•
Vertical bi-amplified connections must be made with
identical power amplifiers. Horizontal bi-amplified
connections can be made with identical or non-identical
power amplifiers with identical gain factors.
•
When making bi-amplified connections, both power
amplifiers must receive identical input signals from the
associated preamplifier. A “Y” adaptor is required if the
associated preamplifier does not offer two connectors per
output channel. Otherwise, each power amplifier can be
connected to a separate connector for the same output
channel of the preamplifier.
•
If desired, contact an authorized Revel dealer for information
about the suitability of power amplifier components before
connecting the Gem2 to the associated power amplifier.
•
Review the owner’s manuals for associated audio
components to determine their connection procedures.