RCBS Cowboy Dies - Manual (Page 4)

packaging is designed to provide safe storage.
• DO NOT store primers in bulk. The blast of just a few hundred primers is sufficient
to cause serious injury to anyone nearby.
• DO NOT force primers. Use care in handling primers.
• DO NOT have more than one can of powder on the bench at one time. Powder
cans should be stored away from the bench to avoid picking up the wrong one.
• DO NOT use any powder unless its identity is positively known. The only positive
identification is the manufacturer’s label on the original canister. Discard all mixed
powders and those of uncertain identity.
• If you use a powder measure, replace the lids on both the powder hopper and powder
can after the powder hopper has been filled.
• When using a powder measure, settle the powder in the powder hopper before charg-
ing any cases. Throw and check the weight of at least ten charges. This will assure you
that the correct powder charge is being thrown.
• When you finish a reloading session, pour any remaining powder back into its origi-
nal factory container. This will preserve the identity and shelf life of the powder.
• DO NOT smoke while reloading.
RECORD KEEPING
• Keep complete records of reloads. Apply a descriptive label to each box showing the
date produced, and the primer, powder and bullet used. Labels for this purpose are
packed with SPEER bullets.
Never attempt to guess at the identity of your ammunition.
Because RCBS has no control over the choice of components,
the manner in which they are assembled, the use of this product,
or the guns in which the resulting ammunition may be used,
we assume no responsibility, expressed or implied, for the
use of ammunition reloaded with this product.