Brinkmann ELITE SERIES 4685 - Manual (Page 12)

11
Step 13
Reattach natural gas orifice to gas
supply line and mounting bracket in
the back rotisserie burner.
NOTE: Leave the back panel off
until the end of conversion
and all gas leak testing has
been done.
Step 14
Attach thermal couple to natural
gas manifold by securing thermal
couple nut to the back rotisserie
burner valve.
Step 15
Carefully set the natural gas
manifold into place by aligning the
burner valves with the burner tubes.
Secure manifold to grill body by
tightening manifold nut.
Re-connect Rotisserie gas supply
line to natural gas manifold.
NOTE: Rotisserie gas supply line nut
must be gas leak tested
before first use.
Orifice
Thermal Couple Nut
Gas Line Nut
Manifold Nut
Rotisserie Gas Supply Line