Brinkmann ELITE SERIES 4685 - Manual (Page 11)

10
Step 10
Carefully pull gas manifold out from
burner tubes to allow access to the
thermal couple nut. Remove
thermal couple nut from back
rotisserie burner valve. Remove
existing LP manifold.
Step 11
Open lid to loosen top back panel
bolts halfway. Loosen bottom back
panel bolts halfway and slide panel
upwards to remove.
Step 12
With the orifice now exposed,
remove orifice from the mounting
bracket and gas supply line of the
back rotisserie burner.
Thermal Couple Nut
Back Panel Bolts
Orifice