LandAirSea 3100 GPS Tracker User Guide User Manual
Page 16
10
Replaying / Simulating the data:
To play back the data, click once on the play button. You will see the car icon move and
the instruments replay the actual travel.
Pause and Step Play:
Click on the Pause / Step Play button if you wish to pause the data. When the data is
paused you can continue to click the button and the software will move forward through
the data sample by sample. Pausing the data is very important if you wish to scroll (See
Scrolling / Panning) to different portions of the map where the car icon is not displayed.
Playback Slower / Playback Faster:
To speed up or slow down the replaying of the data, click on the Playback Slower or
Playback Faster buttons. Holding the button down does not rewind or fast forward the
data. You need to single click on the button to change the speed of playback.
Reset Map:
This button will reset the map to its original position and zoom level. It will also reset the
data playback to the beginning.
View Entire U.S:
Clicking this button will zoom out to a scale that will allow you to view the entire U.S.
Chapter 6:
Basic LandAirSea 3100 Functions