Kino Flo Select/DMX 4Bank (BAL-450) - Manual (Page 11)

11
A) Circular Output Connector: Provides electrical power to the lamp
head with the use of a 4Bank extension cable.
B) DMX-In & DMX-Out: DMX-IN receives DMX signals from Dimmer
Board. DMX-OUT relays DMX signal through to other Fixtures or
Instruments.
C) Fuse: Provides circuit protection. Note: If Fuse is "blown" or
"open" replace with same type of fuse rating as marked.
D) DMX TERMINATE Switch: Terminates DMX signal at the end of
Fixture series.
E) Individual Lamp / Fixture Switch: Converts between INDIVIDUAL
LAMP and FIXTURE methods of DMX control.
F) DMX Address: Sets DMX Address of Fixture.
G) Lamp Select: Set to 4ft for 4ft lamps and 2ft for 2ft or 15” lamps.
H) Manual Switches: Turns lamps on and off manually.
Select DMX 4Bank Control Panel
A E F G H B D C