Kino Flo Select/DMX 4Bank (BAL-450) - Manual (Page 10)

10
Manual Operation
Color Band
Lamp Select Feature
The Select Ballasts have a 4ft / 2ft switch. Set the Selector Switch to
4ft for 4ft lamps and 2ft for 2ft or 15” lamps.
Lamp Select feature continued…
When operating 4ft lamps in high ambient temperature or where
the units are rigged into place with restricted airflow, the 2ft setting
can be used to lower the color temperature and remove any green
spike. The light drops about a half an f-stop in exposure when dropping
from 4ft to 2ft.
It is not recommended to operate 2ft lamps in the 4ft setting. At the 4ft
setting, the color temperature of the 2ft lamps will rise dramatically and
experience a high green spike.
The Ballast operates remote from the fixture. Connect the Extension
cable to the Ballast and the Lamp Harness. After the lamps are properly
installed the Ballast can be turned on. Each switch controls one lamp.
The color bands on the lamp harness correspond to the switches as
illustrated.
Blue
Black
Yellow
Red