Kino Flo Tegra 4Bank DMX (TEG-450) - Manual (Page 6)

6
Gelling the Fixture
Mounting Flozier
Restricting the airflow around the lamps can cause the lamps to operate hotter.
This increased heat will raise the lamp’s color temperature and green spike.
Therefore, it is recommended to clip gels to the doors of the fixture.
Do Not clip gels to louver.
Do Not block the fixture ends in a manner that restricts airflow.
Remove Louver. Stretch two elastic cords
around fixture.
Expand the Barndoors to smooth out the face of the
Flozier and eliminate wrinkles.
Take up slack on both
elastic cords.