Boss Audio Systems RC-2 - Manual (Page 16)

16
Using AUTO Mode to Automatically Start Phrase
Recording with Audio Input
* For instructions on how to stop playback or overdubbing, refer to “Technique for Stopping Operation” (p. 6).
INPUT
4. Play
(recording begins
when the RC-2 receives
audio input). 2. Turn the MODE
knob to AUTO. 3. Press the pedal to switch
to recording standby mode. 5. Press the pedal to
stop recording
(the phrase plays
back after you stop).
Lights in
green
Flashes rapidly
in red
Play. 6. Press the pedal to
start overdubbing.
Lights in
yellow
Press twice
Light goes
off
7. Press the pedal twice
to stop playback.
Lights in
green
Press the pedal to stop
overdubbing
(the phrase plays back
after you stop).
Lights in
red
1. Select an
empty
phrase track.
RC-2_e.book 16 ページ ２００６年１０月２７日 金曜日 午前１０時３１分