HCO SG580MB Manual User Manual
Page 30
HCO ScoutGuard SG580MB
4 Advanced Operations
Page 27
b)
Press UP or DOWN to select Password.
c)
Press LEFT or RIGHT to select On.
d)
Press OK to enter into submenu.
e)
There are three inputs for key in new, old and confirm password,
press ﹟ to switch between each inputs. Press number buttons to
key in the digits. Press UP to delete.
f)
Enter OK to save all current setting and return to info display. If
the inputs are blank, the password will not be changed; if keyed in
correctly, the new password is set. The LCD screen will prompt to
enter the password next time you switch on the camera.
Press MENU to cancel setting and return to previous menu.
4.1.18 Reset to Default Settings
To reset the setting to the default values, the steps are as follows:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Reset.
c) Press OK to reset to default settings and return to info display.
Press MENU to cancel setting and return to info display.
4.2 Playback
In playback mode, images or videos can be viewed and deleted. An
image can also be manually sent by MMS. It can only be done in TEST
mode.
The images can be viewed on the LCD screen on camera and TV
monitor which connect to the camera with a TV cable; the videos can
only be viewed on a TV monitor. For simplicity, operations with PC
won’t be introduced here.