HCO SG580MB Manual - Manual (Page 25)

HCO ScoutGuard SG580MB
4 Advanced Operations
Page 22
b) Press UP or DOWN to select Sense Level.
c) Press LEFT or RIGHT to select Low.
d) Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.12 Set Timer
This parameter defines a certain time lapse in a day when the
Camera can be triggered. The rest of the time the device is shut off. The
effective value for the ranges from 00:00：00 to 23:59:59.
Please note that the start and stop time can only be effective when
the timer is set as On. Provided that the camera should work from eight
a.m. to five p.m., the steps are as following:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Timer Switch.
c) Press RIGHT to select On.
d) Press OK to enter into submenu.
e) Press RIGHT to select item, press UP or DOWN to change the
value until the start time changes to 8 and the stop time changes
to 17.
f) Press OK to save all current setting and the option will be
un-highlighted.
Press MENU to return to previous menu.
4.1.13 MMS Settings
Enter the MMS setting which provided by the network service
provider. There are only four setting to be entered, the steps are as