HCO SG580MB Manual - Manual (Page 23)

HCO ScoutGuard SG580MB
4 Advanced Operations
Page 20
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Video Length.
c) Press LEFT or RIGHT to decrease or increase to 5 Seconds.
d) Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to cancel setting and exit.
4.1.9 Set Video Sound
The following shows how to set video sound as off that the previous
option is on:
e) Press MENU to display the setting menu.
f) Press UP or DOWN to select Video Sound.
g) Press LEFT or RIGHT to select off or on.
h) Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.10 Set PIR Triggering Interval Time
This parameter indicates how long the PIR (Passive Infrared motion
sensor) will be disabled after each triggering in ON mode. During this
time the PIR of the device will not react to the motion of human (or
animals). The minimum interval is 0 seconds, it means the PIR works
all the time. The maximum interval is 1 hour. It means the PIR will be
disabled for 1 hour after each triggering. The default value is 1 minute.
Press LEFT or RIGHT to decrease or increase the value by 5s or 1
minute.
The following shows how to set triggering interval time to 5