Belkin F5D7634-4A-H User Manual
Page 32
30
G Wireless Modem Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
ManUallY ConfIGURInG YoUR RoUTeR
setting your Connection Type to Modem only (disable
Internet sharing)
In this mode, the Router simply acts as a bridge passing packets across
the DSL port� It requires additional software to be installed on your
computers in order to access the Internet�
1
VPI/VCI – Enter your VPI and VCI parameter here� (Assigned by
your ISP)�
2
encapsulation – Select LLC or VC MUX� (Assigned by your ISP)�
dns (domain name server) settings
A “Domain Name Server” is a server located on the Internet that
translates Universal Resource Links (URLs) like “www�belkin�com” to IP
addresses� Many ISPs do not require you to enter this information into
the Router� The “Automatic from ISP” box
(1) should be checked if your
ISP did not give you a specific DNS address� If you are using a static IP
connection type, then you may need to enter a specific DNS address
and secondary DNS address for your connection to work properly� If
your connection type is dynamic or PPPoE, it is likely that you do not
have to enter a DNS address�
Leave the “Automatic from ISP” box checked� To enter the DNS address
settings, uncheck the “Automatic from ISP” box and enter your DNS
entries in the spaces provided� Click “Apply Changes”
(2) to save
the settings�
(1)
(2)