Belkin F5D7634-4A-H User Manual

Page 12

G Wireless Modem Router

sections

table of contents

KnoWInG YoUR RoUTeR

(I)

(G)

(J)

(H)

G Connection to adsl – Gray

This port is for connection to your ADSL� Connect your ADSL to this

port� An RJ11 telephone cord is provided in the package�

H Connections to Wired Computers – Yellow

Connect your wired (non-wireless) computers to these ports� These

ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for

standard UTP category 5 or 6 Ethernet cable� The ports are labeled 1

through 4, with onboard LEDs on the connectors�

I Reset button

The “Reset” button is used in rare cases when the Router may function

improperly� Resetting the Router will restore the Router’s normal

operation while maintaining the programmed settings� You can also

restore the factory default settings by using the “Reset” button� Use the

restore option in instances where you may have forgotten your custom

password�

i Resetting the Router

Push and release the “Reset” button� The lights on the Router will

momentarily flash� The “Router” light will begin to blink� When the

“Router” light becomes solid again, the reset is complete�

ii Restoring the factory defaults

Press and hold the “Reset” button for at least 10 seconds, then

release it� The lights on the Router will momentarily flash� The

“Router” light will begin to blink� When the “Router” light becomes

solid again, the restore is complete�

J Power Jack – black

Connect the included 12V/� 1A DC

power supply to this jack�

K WPs Push button

This button is for the Wi-Fi Protected

Setup feature� Refer to the “Changing

the Wireless Security Settings” section

for more details�

WPS