Brother IntelliFAX 1270e - Manual (Page 74)

9 - 1 R E M O T E F A X O P T I O N S
9
9
Remote Fax Options
Fax Forwarding/Paging
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON, your machine stores the received fax in
memory. Then it dials the fax number you’ve programmed and forwards the fax
message.
1
Press Menu/Set, 8, 1.
2
Press until the LCD shows
FAX FORWARD? , and then press
Menu/Set.
3
The LCD prompts you to enter the
number of the fax machine where faxes
will be forwarded. Enter the forwarding
number (up to 20 digits), and then press
Menu/Set.
4
Press Stop/Exit.
Programming Paging Number
When Paging is selected, your machine dials the pager number you’ve
programmed, and then dials your Personal Identification Number (PIN); this
activates your pager so you know you have a fax message in the memory.
1
Press Menu/Set, 8, 1.
2
Press until the LCD shows
PAGING? , and then press Menu/Set.
3
Enter your pager phone number (up to 20
digits) followed by # #, and then press
Menu/Set. Do not include the area code
if it is the same as that of your
machine.
For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to OFF.
1 . F A X F W D / P A G I N G
F A X F O R W A R D ? or
F W D # :
1 . F A X F W D / P A G I N G
P A G I N G ?
or
P A G # :