Brother IntelliFAX 1270e - Manual (Page 42)

4 - 6 I N I T I A L S E T U P
Memory Storage
In the event of a power failure, all settings in the INITIAL SETUP , SETUP
RECEIVE and SET AUTO DIAL plus the COVERPG SETUP and
COVERPAGE MSG (from SETUP SEND ) operations are stored permanently. You
may have to reset the date and time.
Setting Tone/Pulse Dialing Mode
Your fax machine comes set to accommodate Tone (multi-frequency) dialing service.
If you have Pulse (rotary) dialing service, you need to change the dialing mode.
1
Press Menu/Set, 1, 5.
2
Press to select TONE or PULSE ,
and then press Menu/Set.
3
Press Stop/Exit.
Setting Up Your Area Code (USA Only)
If you must dial the area code to call within your area code, do not enter this setting.
1
Press Menu/Set, 0, 2.
2
Use the dial pad to enter your area code,
and then press Menu/Set.
3
Press Stop/Exit.
5 . T O N E / P U L S E
D I A L I N G : T O N E ?
D I A L I N G : P U L S E ?
or
2 . C A L L E R I D
A R E A C O D E : 0 0 0
A R E A C O D E : 9 0 8