E-flite Yak 54F 3D ARF - Manual (Page 9)

9
Wing Installation
Required Parts
Wing Fuselage
Required Tools and Adhesives
Foam-safe CA Ruler
Paper towel / tissue String
T-Pins Tape
 1. Slide the wing into the fuselage. Center the
wing in the fuselage.
 2. Pin a string to the center aft fuselage.
Use the string to square the wing to the
fuselage centerline.
 3. Look directly down the fuselage from the
front. Use the fin as a reference to position
the wing 90-degrees to the vertical centerline
of the fuselage. Sand the fuselage as necessary
for alignment.