E-flite Yak 54F 3D ARF - Manual (Page 6)

6
assembly or material used for the final assembly,
no liability shall be assumed nor accepted for
any damage resulting from the use of the final
assembled product. By the act of using the
assembled product, the user accepts all resulting
liability.
Please note that once assembly of the model has
been started, you must contact Horizon Hobby,
Inc. directly regarding any warranty question.
Please do not contact your local hobby shop
regarding warranty issues, even if that is where
you purchased it. This will enable Horizon to better
answer your questions and service you in the event
that you may need any assistance.
If the buyer is not prepared to accept the liability
associated with the use of this product, the buyer
is advised to return this kit immediately in new and
unused condition to the place of purchase.
Horizon Hobby, Inc.
4105 Fieldstone Road
Champaign, Illinois 61822
(877) 504-0233
horizonhobby.com
Before Starting Assembly
Before beginning the assembly of your Yak-54F,
remove each part from its bag for inspection.
Closely inspect the fuselage, wing panels, rudder
and stabilizer for damage. If you find any
damaged or missing parts, contact the place of
purchase.
Using the Manual
This manual is divided into sections to help make
assembly easier to understand, and to provide
breaks between each major section.
Remember to take your time and follow the
directions.
Warranty Information
Horizon Hobby, Inc. guarantees this kit to be free
from defects in both material and workmanship
at the date of purchase. This warranty does not
cover any component parts damage by use or
modification. In no case shall Horizon Hobby’s
liability exceed the original cost of the purchased
kit. Further, Horizon Hobby reserves the right to
change or modify this warranty without notice.
In that Horizon Hobby has no control over the final