E-flite Yak 54F 3D ARF - Manual (Page 25)

25
Landing Gear Installation
Required Parts
Airframe Landing gear
Tail skid Wheel pant (2)
1 ¼-inch wheel (2)
Wheel retainer (2)
Landing gear fairing (2)
Required Tools and Adhesives
Hot glue Foam-safe CA
 1. Glue the tail skid using foam-safe CA
 2. Install the landing gear into position by pressing
up into the landing gear mount.
Note : Use a small amount of foam-safe CA if
the landing gear is loose in the slot.