E-flite Funtana 300 ARF - Manual (Page 23)

23 E-flite Funtana 300 Assembly Manual
Final Assembly
Required Parts
Airframe assembly Side force generator (top) (2)
Side force generator (bottom) (2)
Required Tools and Adhesives
Foam-safe CA Square
 1. Locate the top and bottom side force generators. Note
the tab on the top is toward the rear of the generator,
and the bottom has the tab toward the front of the
generator.
 2. Use foam-safe CA to glue the top side force generator
into the slot on the top of the wing. Make sure to slide the
generator toward the trailing edge of the wing, and that
it is square to the top of the wing.