E-flite Funtana 300 ARF - Manual (Page 15)

15 E-flite Funtana 300 Assembly Manual
 13. Slide the end of the aileron pushrod into the micro
pushrod connector. Use hot glue to secure the aileron
servo to the wing using the servo template on the wing.
Another alternative would be to use foam-safe CA to glue
the servo down.
 14. With the aileron and aileron servo centered, use a
2mm x 4mm machine screw and #0 Phillips screwdriver
to secure the pushrod in the connector. Tape the servo
lead to the bottom of the wing using hinge tape.