E-flite Mini Pulse XT ARF - Manual (Page 19)

Tail Installation
Required Parts
Fuselage
Rudder/Fin
Stabilizer/Elevator
Servo (2)
Servo extension, 12" (305mm) (2)
Control connectors w/backplate (2)
2mm x 4mm screw (2)
4-40 locknut (2)
#4 washer (2)
Linkage wire, 4" (102mm) for elevator
Linkage wire, 5
1
/
2
" (140mm) for rudder
Tailwheel, 3/4"
Wheel collar (tailwheel)
Required Tools and Adhesives
Nut driver: 1/4"
Drill
Drill bit: 1/16" (1.5mm)
Screwdriver, #0 Phillips
 1. Attach the tail wheel to the tail gear wire using a
1/16" wheel collar and setscrew.
19