Broilmaster P4XF-1 - Manual (Page 24)

B101623-2-0112 Page 24
GRILL ASSEMBLY
Installing Radiation Shield
Attach shield by inserting the shield over the studs. See Figure 6.
Installing the Hose and Regula-
tor
To ease assembly, remove grill top before assembling. Remove the
2 pins and clips at the rear of the grill top and set aside.
Figure 4
Attach the hose and regulator supplied with the unit as shown in
Figure 5.
Figure 5
Figure 6
Installing Control Panel
Attach radiation shield control panel assembly to grill bottom with
two (2) 10-24 keps nuts. See Figure 7.
Figure 7