Watts ProSense - Manual

TABLE OF CONTENTS
JOB SPECIFICATION SHEET ...............................................1
EQUIPMENT CONFIGURATION ...........................................1
SAFETY INFORMATION ........................................................2
HOW TO USE THIS MANUAL ...............................................2
GENERAL AND COMMERCIAL INSTALLATION
INSTRUCTIONS .....................................................................2
CONTROLLER FEATURES ...................................................4
PLACING WATER CONDITIONING SYSTEM INTO
OPERATION ...........................................................................5
PROGRAMMING MODE ........................................................6
DISINFECTION OF WATER CONDITIONING SYSTEMS .....11
WIRING DIAGRAMS ..............................................................12
POWERHEAD ASSEMBLY ....................................................13
ProSense CONTROL VALVE ASSEMBLY .............................14
ProSense SECOND TANK ASSEMBLY .................................15
3/4" METER ASSEMBLY ........................................................16
1" METER ASSEMBLY ...........................................................17
ProSense BYPASS VALVE ASSEMBLY .................................18
BYPASS VALVE ASSEMBLY .................................................19
PROBE KIT ............................................................................20
TROUBLESHOOTING ...........................................................21
ProSense METER FLOW DATA .............................................23
ProSense INJECTOR FLOW DATA
(1600 SERIES INJECTORS) ..................................................24
ProSense CONTROL DIMENSIONS .....................................25
WATER CONDITIONER FLOW DIAGRAMS .........................26
SERVICE ASSEMBLIES ........................................................28
JOB SPECIFICATION SHEET
Job No: ___________________________________________
Model No: _________________________________________
Water Test: _________________________________________
Capacity Per Unit: ___________________________________
Mineral Tank
Size: ____________Diameter: __________ Height: _________
Brine Tank Size and Salt Setting per Regeneration: _________
ProSense Control Valve Specifications:
1. Timer Gallon Setting:________________________ Gallons
2. Regeneration Program Setting:
a. Brine and Slow Rinse: _____________________Minutes
b. Backwash: ______________________________Minutes
c. Rapid Rinse: _____________________________Minutes
d. Brine Tank Refill: _________________________Minutes
3. Drain Line Flow Control: _______________________ gpm
4. Brine Refill Rate: _____________________________ gpm
5. Injector Size: ____________________________________
EQUIPMENT CONFIGURATION
ProSense Water Softener Configuration
Figure 1
IOM-WQ-PROSENSE
Instructions for Installing ProSense
Twin Alternating Water Softening Systems
Service Manual