Watts PWBWGAC 3-4 Cu. Ft. User Manual
Pure water, Series pwbwgac, Whole house carbon system
For Residential and Light Commercial Applications
ES-WQ-PWBWGAC
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative ––––––––––––––––––––––––––––––––––––––––
PWBWGAC
Whole House Carbon System
Connection Size: 1" (25mm)
Flow Rate: up to 15 gpm (56 lpm)
Watts Whole House filters for chlorine taste, odor, and sedi-
ment removal.
Our PWBWGAC Series activated carbon filters are designed for
residential and light commercial applications up to 15 gallons
per minute. Watts activated carbon filters are highly popular
because they correct a wide range of water quality issues
by removing chlorine, taste, odors, organic chemicals, and
sediment.
Activated carbon has been used in the treatment of drinking
water for over 2000 years. It was found that charred wood
products aided in improving the quality of drinking water.
Media
We use Aquasorb
®
coconut shell activated carbon. This is a
high-activity granular activated carbon manufactured by steam
activation of select coconut shell charcoal. Its high micro-
porosity makes it particularly well suited for the adsorption of
low molecular weight compounds at very low concentrations.
It is also ideally suited for the removal of oxidizing agents such
as chlorine from drinking water. Another important feature of
this activated carbon is its superior mechanical hardness which
helps ensure a clean, low dust product with an exceptionally
long life span.
Pro SE Series Control Valve
Manufactured from high-tech materials, the Pro SE Series
control valve has been engineered and tested to withstand
the equivalent of 27 years of uninterrupted daily use. The pro-
prietary design features a Teflon
®
coated piston that glides
through a series of seals and spacers. This seal/spacer and
piston configuration is the most reliable design in control valve
technology. The valve features an electronic control for easy
programming.
Filter Tank
Features a non-corrosive fiberglass tank with a thermoplastic
inner liner. The tanks are NSF/ANSI Standard 44 or 61 certified.
PURE WATER
Series PWBWGAC
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Benefits
Great tasting water from every tap in your house!
No bad tastes!
No foul odors!
Crystal clear water for drinking, bathing, and cooking!
User-friendly equipment.
Low maintenance due to automatic operation.
System Specifications
Minimum inlet pressure: 30 psig
Maximum operating pressure: 125 psig
Minimum water temperature: 34°F (1°C)
Maximum water temperature: 110° F (43°C)
Power
Voltage: 120VAC
Frequency: 60Hz
Power consumption: 7 Watts Maximum
Installation
Location: Indoors (Protect from direct sunlight)
Minimum ambient temperature: 34°F (1°C)
Maximum ambient temperature: 122°F (49°C)
Note:
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before or after
the system.
Teflon
®
is a registered trademark of E. I. du Pont de Nemours
and Company or its affiliates.