Standard faucet installation – Watts PWDWLCV2 User Manual
Page 4
4
Standard Faucet Installation
STEP 2
Step A – Remove nut (item 11) and blue tubing (item 12) from faucet
(Leave the nut and plastic delrin sleeve (item 10) on the
blue tube) .
Step B – Feed both the red and black tubing through the pre drilled
hole in the sink/counter until faucet is seated .
Step C – Under the sink - on to the threaded faucet stem in order
first slide on the rubber gasket (item 6), the slotted washer
(item 7), the white spacer with the open end UP (item 8),
the hex nut washer (item 9), and lastly secure with nut (item
11) .
Step D – Make sure the plastic delrin sleeve (item 10) is on the end
of the blue tube, push the white plastic insert (item 13) into
the end of blue tubing with the delrin sleeve, insert the blue
tube (item 12) into the faucet stem and secure with nut
(item 11) .
Note: DO NOT overtighten nut.
- WQT4RO11-50MT (19 pages)
- WQT4RO11-50MT (2 pages)
- E400 (4 pages)
- E500 (1 page)
- E400 (1 page)
- LFE400 (1 page)
- HY-430 (1 page)
- HAV (2 pages)
- P3 (1 page)
- LFP3 (1 page)
- RD25 (1 page)
- N170 (12 pages)
- N170 (2 pages)
- N170 (1 page)
- N170 (2 pages)
- OTV (1 page)
- FD20-SQ (1 page)
- 800M4FR (2 pages)
- LF800M4QT (4 pages)
- 188A (54 pages)
- 800M4QT (4 pages)
- LF800M4FR (4 pages)
- 800M4FR (4 pages)
- AS-B (1 page)
- AS-B (2 pages)
- LFWDS (2 pages)
- LFWDS (16 pages)
- LFWDS (4 pages)
- LFWDS (12 pages)
- LFN388 (2 pages)
- 188A (2 pages)
- LF8 (2 pages)
- S8 (2 pages)
- 7 (4 pages)
- 7 (4 pages)
- 7 (2 pages)
- Series G1070 (2 pages)
- Series 1070 (2 pages)
- 008QT (2 pages)
- CO44 (1 page)
- LFBD-QT (1 page)
- PWDWUV3 (1 page)
- PWDWUV3 (8 pages)
- FD7-SQ (1 page)
- FD15-SQ (1 page)