BenQ MP510 - Manual (Page 30)

Operation 30
4. Press Down to highlight Timer Position and set the timer
position by pressing Left/ Right.
Upper left
J
lower left
J
upper right
J
lower right
5. Press Down to highlight Timer Counting Direction and select
your desired counting direction by pressing Left/ Right.
6. Press Up to highlight Timer Activate
and press Left/ Right. A
confirmation message displays.
7. Press Down to confirm. You will see the
message “Timer is on!” displaying on the
screen. The timer start counting at the time the timer is on.
To cancel the timer, repeat steps 1, 6, and 7. You will see the message “Time is up!”
displaying on the screen.
How to use the TIMER On/Show button?
The button is a multi-functional key.
•
If the presentation timer is off, pressing this button displays a
confirmation message. You can decide whether to activate the
timer or not by following the on-screen instruction.
• If the timer is already on and hidden, pressing this button
displays the timer on the screen for a few seconds.
• If the timer is already on and displays on the screen, pressing this
button has no effect.
Hiding the picture
In order to draw the audience’s full attention to
the presenter, you can use BLANK to hide the
screen picture. Press any key on the projector
or remote control to restore the picture. The
word “BLANK” appears at the lower right
corner of the screen while the picture is
hidden.
You can set the blank time in the
Setting > Blank Timer menu to let the
projector return the picture automatically after a period of time when there is no action
taken on the blank screen. The length of time can be set from 0 to 60 minutes in one-minute
increments. Selecting 0 minute disables the function.
Once BLANK is pressed, the projector enters Economic mode automatically.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
Selection Description
Count Up Increases from 0 to the preset time.
Count down Decrease from the preset time to 0.
5 min
5 min 5 min
5 min
Confirm turning timer On?
Yes No